Dedicated to the research and development of hydraulic system components, providing services to over 100000 enterprises.
-
Service
-
Share:
Wheel (OMV)
If you have any questions, please contact us at the first time!
Product category:
Product Keywords:
- Product description
-
Main Performance Parameters
Displacement (mlr) 310 390 500 630 800 1000 1250 1600 Flow (LPM) Max Continuous 150 150 150 150 150 300 312 320 Intermittent 225 225 225 225 225 340 400 400 Speed (RPM) Max Continuous 484 385 307 241 320 300 250 200 Intermittent 699 572 454 355 400 350 320 250 Pressure (Mpa) Max Continuous 20.5 20.5 17 16 16 16 16 16 Intermittent 31 31 24 25 25 25 25 25 Torque (N*m) Max Continuous 928 1156 1215 1411 1800 2200 2800 3600 Intermittent 1356 1633 1685 2217 2800 3200 4400 5500 Standard Motor Selection
Four-hole Parallel Key
Four-hole Spline
Motor User Guide
To ensure optimal operation of cycloid hydraulic motors such as OMM, OMP, OMR, BM3, BM4, the following is recommended:
1. Oil Temperature: Normal operating oil temperature 20°C~ 60°C, maximum system operating temperature 90°C (should not exceed one hour).
2. Filter and Oil Cleanliness Level: The filter's filtration accuracy is 10-30 microns. It is best to install a magnetic block at the bottom of the oil tank to prevent metal shavings from entering the system. The solid contamination level of the working oil should not be higher than 19/16.
3. Oil Viscosity: The kinematic viscosity at an oil temperature of 40°C is 42-74 mm²/S. Hydraulic oil can be selected based on actual operating and ambient temperatures.
4. Motors can be used in series or in parallel. When used in series or parallel, if the back pressure exceeds 10 Mpa (speed below 200 RPM), an external drain port must be used for pressure relief. It is best to directly connect the external drain port to the oil tank.
5. The output shaft of BMS, BMSY, BMT, BMV, BMK6 series motors can withstand significant axial and radial loads.
6. For optimal motor operation, select 1/3 to 2/3 of the rated operating conditions.
7. To ensure a long service life for the motor, it should first run at 30% of the rated pressure for approximately 1 hour when loading. In any case, ensure the motor is filled with oil before applying load.
Wheel (OMV)
If you have any questions, please contact us at the first time!
Product category:
Optimization keywords:
Related Products
Product Inquiry
We will contact you within one working day. Please pay attention to your email.
Address
No. 215 Jianhua South Street, Yuhua District, Shijiazhuang City, Hebei Province, China